Four S60 Flash File MT6572 Hang Logo Dead Fix Firmware ~REPACK~

Four S60 Flash File MT6572 Hang Logo Dead Fix Firmware ~REPACK~

LINK >> https://blltly.com/2tykwq

How to Fix Four S60 Hang Logo and Dead Boot Problem with MT6572 Flash File

If you have a Four S60 smartphone that is stuck on the boot logo or dead after flashing, you may need to use a flash file to restore it to normal. A flash file is a firmware that contains the operating system and other data for your device. By flashing a flash file, you can overwrite the corrupted or damaged firmware and fix the issues.

In this article, we will show you how to download and install the Four S60 flash file MT6572, which is compatible with your device model and chipset. This flash file can help you fix the hang logo and dead boot problem on your Four S60 phone. Follow the steps below carefully and make sure you have a backup of your data before proceeding.

Requirements

A Windows PC or laptop

A USB cable

A Four S60 smartphone with at least 50% battery charge

The Four S60 flash file MT6572 (download link at the end of this article)

The SP Flash Tool (download link at the end of this article)

The MTK USB Driver (download link at the end of this article)

Steps to Flash Four S60 Flash File MT6572

Install the MTK USB Driver on your PC or laptop.

Extract the SP Flash Tool and the Four S60 flash file MT6572 zip files to a folder on your PC or laptop.

Open the SP Flash Tool folder and run the flash_tool.exe as administrator.

Click on the Scatter-loading button and browse to the Four S60 flash file MT6572 folder. Select the MT6572_Android_scatter.txt file and click Open.

Make sure all the partitions are checked and click on the Download button.

Turn off your Four S60 phone and remove the battery (if removable).

Connect your phone to the PC or laptop via USB cable while holding the Volume Down or Volume Up button (depending on your device).

The SP Flash Tool will detect your phone and start flashing. Wait for the process to complete. You will see a green tick mark when it is done.

Disconnect your phone from the PC or laptop and insert the battery (if removed).

Turn on your phone and wait for it to boot up. It may take a few minutes for the first time.

Congratulations! You have successfully flashed the Four S60 flash file MT6572 and fixed the hang logo and dead boot problem on your device. You can now enjoy using your phone without any issues. If you have any questions or problems, feel free to leave a comment below.

Download Links

Four S60 Flash File MT6572

SP Flash Tool

MTK USB Driver 061ffe29dd